Tantrum1
Well-Known Member
Good day all! Looking for a little advice regarding titanium. I have a titanium firewall and in a few places it needs to be trimmed ever so slightly. I'm talking approximately 1/16th of an inch at the most. its ever so slightly interfering with my cowl (my cowl over laps the firewall and bolt to the fuselage). I file is very time consuming, and not as effective as i'd like. I'm wondering if a angle die grinder with a roloc 60 grit sanding disc would work? There just isn't enough there to do with my snips.
Annnnnddd GO!
Annnnnddd GO!