• Become a Premium Member today!

    Welcome aboard HomebuiltAirplanes.com, your destination for connecting with a thriving community of more than 10,000 active members, all passionate about home-built aviation.

    For a nominal fee of $99.99/year or $12.99/month, you can immerse yourself in this dynamic community and unparalleled treasure-trove of aviation knowledge.

    Why become a Premium Member?

    • Dive into our comprehensive repository of knowledge, exchange technical insights, arrange get-togethers, and trade aircrafts/parts with like-minded enthusiasts.
    • Unearth a wide-ranging collection of general and kit plane aviation subjects, enriched with engaging imagery, in-depth technical manuals, and rare archives.

    Become a Premium Member today and experience HomebuiltAirplanes.com to the fullest!

    Upgrade Now
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Here is the fin. This will have to be rebuilt also because it was glued with the same glue as the elevator halves.
These are the aluminum parts that I have made so far. I am currently working on the steel parts and will have pictures of some of them soon.
This is the horizontal which used the same glue as the fuselage so it is airworthy. After inspection there are a few discrepancies to fix but all are
Here is the fuselage. There are some water stains on it but after inspection no delamination or soft areas were seen so it is airworthy. There are a f
Here is the fin. This will have to be rebuilt also because it was glued with the same glue as the elevator halves.
Here are the results of the elevator service temperature test. I heated the area up to 225 degrees F and then this laminated trailing edge was peeled
These are the elevator halves. The workmanship looked good but further testing determined the glue quality was inferior so they will have to be rebuil
This is that same rib except I broke the nose rib doubler off to test the glue strength. On this test I also heated up the nose doubler and surroundin
M

Here is the fin. This will have to be rebuilt also because it was glued with the same glue as the elevator halves.

There are no comments to display.

Media information

Album
Replica Plans SE-5A
Added by
mtgunner
Date added
View count
287
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
fin.jpg
File size
53 KB
Dimensions
800px x 600px

Share this media

Back
Top